Switch, Vented Seat: Description
There are two a available vented seat switches:
- There are momentary contact push button vented seat switches mounted in the Integrated Center Stack (ICS) that operate the vented seat system. Each vented seat switch has two Light-Emitting Diode (LED) indicator lamps, which indicate the selected level (Low or High) of the vented seats.
- On vehicles equipped with U-Connect and premium packages, you will find the vented seat switch located within the climate option of the touch screen on the Radio Receiver Module (RRM). The switch will illuminate when turned on and show the level requested.
The LED indicator lamps in each hard press vented seat switch cannot be repaired. If the LED lamps are faulty or damaged, or the switch is inoperative or damaged the ICS assembly must be replaced. for the switch pod replacement procedure. Refer to SWITCH, VENTED SEAT, REMOVAL . If the issue is with the U-Connect selection, conventional diagnostic methods will not prove conclusive in the diagnosis of the electronic controls and communication between other modules and devices that provide some features of the heating and cooled accessories U-Connect touch screen operation. The most reliable, efficient, and accurate means to diagnose the electronic controls and communication related to heating and cooled accessories U-Connect touch screen operation requires the use of a diagnostic scan tool. Refer to the appropriate diagnostic information.