Pad, Vented Seat: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Seat back shown. Seat bottom similar.
- Disconnect and isolate the negative battery cable.
- Remove the seat cushion or seat back cover.
- Disconnect the heated seat electrical connector.
- Carefully guide the vented seat pad flange (3) through the opening (2) in the seat foam (1).
- Remove the vented seat pad (3) by peeling the pad away from the cushion (1). Be careful not to remove excessive foam from the cushion.