Motor, Vented Seat: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Seat back shown. Seat bottom similar.
- Install the vented motor assembly by securing the 4 retaining clips (1) to the seat assembly.
- Connect the vented seat motor electrical connector (3) and install the electrical harness pin-type retainer (2) to the seat frame (1).
- Install the seat cushion or seat back cover.
- Reconnect the negative battery cable.
- Verify vented seat system operation.