LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1669 (Front Axle - 235 Aa (9 1/4) - 2500 Hd) >> Seal, Axle Drive Shaft >> Removal >> Left >> Right

Seal, Axle Drive Shaft: Removal: Left: Right

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The differential does not need to be removed to service the right axle seal.

  1. Remove right side hub bearing and axle shaft.
    GC0155100Courtesy of CHRYSLER GROUP, LLC
  2. Remove the 4WD shift actuator (1).
    GC0155386Courtesy of CHRYSLER GROUP, LLC
  3. Remove the 4WD shift collar (2).
  4. Remove the right side axle shaft seal using (special tool #8476, Installer, Seal), (special tool #C-4171, Driver Handle, Universal) and (special tool #C-4171-2, Extension, Drive Handle)
  5. Drive the axle seal inward to remove it.
scientia non olet · About LEMON Manuals