LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1669 (Front Axle - 235 Aa (9 1/4) - 2500 Hd) >> Case Assembly, Differential, Electric Locker >> Removal

Case Assembly, Differential, Electric Locker: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0107630Courtesy of CHRYSLER GROUP, LLC
  1. Remove differential housing cover and drain lubricant from the housing.
  2. Remove hub bearings and axle shafts.
  3. Cut sensor wire tie strap (4) from adjuster lock.
  4. Remove sensor target magnet (1) from bearing cap.
    GC0107593Courtesy of CHRYSLER GROUP, LLC
  5. Remove adjuster lock bolts (3) and adjuster locks (2).
    GC0107631Courtesy of CHRYSLER GROUP, LLC
  6. Remove electric locker connector (1) retainer (2) bolt from differential housing.
    GC0107632Courtesy of CHRYSLER GROUP, LLC
  7. Remove retainer (1) and connector (2) from differential housing.
  8. Remove retainer (1) from connector (2) and remove O-ring (3) from connector.
  9. Mark bearing caps left and right for installation reference.
  10. Loosen bearing cap bolts and loosen adjusters with a hammer and punch.
  11. Remove bearing cap bolts and bearing caps.
  12. Slid electric locker connector through differential housing.
  13. Remove differential case and bearing cups from the housing.
  14. Tag bearing cups left and right for installation reference.
scientia non olet · About LEMON Manuals