Bearing, Differential Side, Electric Locker: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the differential case from the housing.
- Bend anti-rotation tabs outwards.
- Install Plug (special tool #9611, Plug, Differential End) (1) into the end of the case.
- Remove differential case bearings (2) with Puller (special tool #C-293-PA, Puller, Press) (3) and Adapters (special tool #9613, Adapters, Puller) (4).