Reverse Planetary Gear Set
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The reverse planetary gear set is the middle of the three planetary sets. The reverse planetary carrier can be driven by the overdrive clutch as required. The reverse planetary carrier is welded to the reaction annulus gear and splined to the input annulus gear, which can be held by the low/reverse clutch. The reverse annulus gear, input planetary carrier, and output shaft are all one piece. The reverse annulus gear is retained on the input carrier flange by a hidden snap ring and can not be disassembled.