LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1662 (5.7L - DTCS P2271 To U1440 - 2500 Hd) >> DTC Troubleshooting >> P2299-Brake Pedal Position / Accelerator Pedal Position Incompatible >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
CUSTOMER PRESSING ACCELERATOR PEDAL AND BRAKE PEDAL, AND HOLDING THEM DOWN SIMULTANEOUSLY
BRAKE PEDAL OUT OF CALIBRATION
BRAKE SWITCH
ACCELERATOR PEDAL POSITION (APP) SENSOR

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  . 

scientia non olet · About LEMON Manuals