LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1653 ((Memory Seat Module (MSMD) - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> B1D9B-54-Seat Horizontal Front Stop Not Learned-Missing Calibration >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
OTHER DTCS SET IN THE MEMORY SEAT MODULE-DRIVER (MSMD)
SEAT TRACK DAMAGED OR OBSTRUCTED
SEAT STANDARDIZATION ROUTINE NOT PERFORMED
MEMORY SEAT MODULE-DRIVER (MSMD)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .

scientia non olet · About LEMON Manuals