LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 ((Totally Integrated Power Module (TIPM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B219A-Ignition Unlock Run/Start Control Circuit OVERCURRENT >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Totally Integrated Power Module (TIPM) sets this code when a short to ground condition exists in the (F1) Ignition Off/Run/Start Control Output circuit.

scientia non olet · About LEMON Manuals