Hoses And Tubes, Washer: Operation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Washer fluid in the washer reservoir is pressurized and fed by the washer pump/motor unit through the washer system plumbing and fittings to the two washer nozzles. Whenever routing the washer plumbing or a wire harness containing washer plumbing, it must be routed away from hot, sharp, or moving parts; and, sharp bends that might pinch the plumbing must be avoided.