LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1627 (Vehicle Theft Security - (Service Information) - 2500 Hd) >> Switch, Hood Ajar >> Installation >> Stand Alone Switch Bracket

Stand Alone Switch Bracket

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0086783Courtesy of CHRYSLER GROUP, LLC
  1. Position the stand alone hood ajar switch mounting bracket (3) onto the upper radiator cross member (1).
  2. Install and tighten the screw (2) that secures the mounting bracket to the upper radiator cross member. Tighten the screw to 5.5 N.m (4 ft. lbs.).
  3. Reinstall the stand alone hood ajar switch (2) into the mounting bracket. Refer to SWITCH, HOOD AJAR, INSTALLATION .
scientia non olet · About LEMON Manuals