LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1626 (Passive Entry Module (PEM) - (Service Information) - 2500 Hd) >> Antenna, Passive Entry >> Installation >> Center Floor Console

Center Floor Console

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0158134Courtesy of CHRYSLER GROUP, LLC
  1. Position the LF antenna to the Occupant Restraint Controller (ORC) bracket for installation.
  2. Install the two screws (1) that secure the antenna to the bracket.
    GC0158194Courtesy of CHRYSLER GROUP, LLC
  3. Install the ORC (5), bracket (4), and cover to the vehicle. (Refer to 10 - Restraints/CONTROLLER, Occupant Restraint/Installation)
  4. Connect the LF antenna harness to the LF antenna connector (1).
  5. Install the center floor console to the vehicle. (Refer to 23 - Body/Interior/CONSOLE, Center/Installation)
  6. Reconnect the battery cable to the negative battery post.