Fascia, Front: Installation: Upper
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Locate the end wings under the headlamp (3) and roll down into position.
- Position the center locator pin in the center of the fascia to the retainer hole and seat fully.
- Working from the center out, seat all the clips fully.
- Install the grille. Refer to GRILLE, INSTALLATION
.NOTE:
Sport fascia shown, upper fascia similar.
- Install the screws (1) attaching the fascia (3) to the fender (2).
- Position the wheelhouse splash shield back and install the push pins (3).