Fascia, Front: Installation: Sport
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Locate the fascia (1) over the upper surface of the bumper beam (2).
- Position the center locator pin in the center of the fascia to the retainer hole and seat fully.
- Pry or bend the outer ears of the fascia (1) around the headlamps and align to the fender (3).
- Confirm that the fascia (1) and the bumper (2) are lined up correctly and seat the upper clips fully.
- Install the grille. Refer to GRILLE, INSTALLATION
.
- Install the four lower fasteners (2).
- Install the screws (1) attaching the fascia (3) to the fender (2).
- Position the wheelhouse splash shield back and install the push pins (3).