Bumper, Rear: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the bumper (1) onto the vehicle and line up the pins on the sides.
- Install the bolts (3 and 4).
- Tighten the bolts (3) to 54 N.m (40 ft. lbs.).
- Tighten the bolts (4) to 54 N.m (40 ft. lbs.).
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect the electrical connectors (2).