Module, Compass: Description
The Remote Compass Module (RCM) (2) is a separate stand alone module mounted in the overhead console (1). The RCM can be accessed by removing the overhead console from the vehicle. Some vehicles are equipped with a Universal Garage Door Opener (UGDO) also known as a HomeLink® transceiver. Both the RCM and the HomeLink® transceiver are one in the same and sometimes referred to as the Electronic Overhead Module (EOM).
The only visible component of the HomeLink® transceiver are the three push buttons (4). The buttons are marked with one, two or three dash marks, respectively, for identification of each channel. For more information on the HomeLink® transceiver. Refer to DESCRIPTION .
The RCM or the HomeLink® transceiver cannot be repaired. If ether the compass position sensor or the transceiver is inoperative and requires replacement, the EOM must be replaced as a complete assembly, for the appropriate procedure. Refer to MODULE, COMPASS, REMOVAL .