LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 ((Final Drive Control Module (FDCM) - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> C2314-Stabilizer Bar/Differential Indicator Supply Circuit >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
DISCONNECTING STABILIZER BAR SWITCH
(T536) LOCKER LED SOURCE CIRCUIT SHORTED TO VOLTAGE
(T536) LOCKER LED SOURCE CIRCUIT OPEN OR HIGH RESISTANCE
(T529) STABILIZER BAR ENGAGED LED CIRCUIT SHORTED TO VOLTAGE
(T529) STABILIZER BAR ENGAGED LED CIRCUIT SHORTED TO GROUND
(T529) STABILIZER BAR ENGAGED LED CIRCUIT OPEN OR HIGH RESISTANCE
(T530) STABILIZER BAR DISENGAGED LED CIRCUIT SHORTED TO VOLTAGE
(T530) STABILIZER BAR DISENGAGED LED CIRCUIT SHORTED TO GROUND
(T530) STABILIZER BAR DISENGAGED LED CIRCUIT OPEN OR HIGH RESISTANCE
FINAL DRIVE CONTROL MODULE (FDCM)
scientia non olet · About LEMON Manuals