LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 ((Final Drive Control Module (FDCM) - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> C2311-Stabilizer Bar/Differential Indicator Supply Circuit High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
DISCONNECTING STABILIZER BAR SWITCH
(T536) LOCKER LED SOURCE CIRCUIT SHORTED TO VOLTAGE
(T536) LOCKER LED SOURCE CIRCUIT OPEN OR HIGH RESISTANCE
(T532) OPEN LOCKER LED CIRCUIT OPEN OR HIGH RESISTANCE
(T532) OPEN LOCKER LED CIRCUIT SHORTED TO VOLTAGE
(T533) LOCKER LED REAR CIRCUIT OPEN OR HIGH RESISTANCE
(T533) LOCKER LED REAR CIRCUIT SHORTED TO VOLTAGE
(T534) LOCKER LED FRONT/REAR CIRCUIT OPEN/HIGH RESISTANCE
(T534) LOCKER LED FRONT/REAR CIRCUIT SHORTED TO VOLTAGE
FINAL DRIVE CONTROL MODULE (FDCM)
scientia non olet · About LEMON Manuals