Track Bar, Rear: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position the track bar (2) onto the vehicle.
- Install the track bar bolt and nut (1) in the frame bracket. Do not tighten.
- Install the track bar bolt and nut (1) in the axle bracket. Do not tighten.
- Remove the holding fixture supporting the axle.
- Remove the supports and lower the vehicle.
- Tighten the track bar mounting bolts/nuts to specifications. Refer to TECHNICAL SPECIFICATIONS .