LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1620 (Rear Suspension - 2500 Hd) >> Stabilizer Bar, Rear Suspension >> Installation

Stabilizer Bar, Rear Suspension: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161513Courtesy of CHRYSLER GROUP, LLC
  1. Install stabilizer bar bushings.
  2. Install the stabilizer bar (3) and center it with equal spacing on both sides.
  3. Install stabilizer bar retainers and bolts (2). Do not tighten.
  4. Install the stabilizer bar links on the stabilizer bar (1) and install link lower mounting nuts. Do not tighten.
  5. Remove the support and lower the vehicle.
  6. Tighten the stabilizer bar retainer bolts (2) and stabilizer lower link nuts to specifications. Refer to TECHNICAL SPECIFICATIONS .
scientia non olet · About LEMON Manuals