LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1620 (Rear Suspension - 2500 Hd) >> Shock Absorber, Suspension >> Installation >> Shock With Leaf Spring

Shock With Leaf Spring

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161581Courtesy of CHRYSLER GROUP, LLC
  1. Position the top of the shock (3) onto the upper stud (2) and install the nut (1). Do not tighten. 
    GC0161543Courtesy of CHRYSLER GROUP, LLC
  2. Position the lower shock absorber (1) into the mount (3) and install the nut and bolt (2). Do not tighten. 
  3. Remove the holding fixture supporting the axle.
  4. Remove the support and lower the vehicle.
  5. Tighten upper and lower shock bolt and nuts to specifications. Refer to TECHNICAL SPECIFICATIONS .
scientia non olet · About LEMON Manuals