Arm, Lower Control: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Support the rear axle with a suitable holding fixture.
- Remove the parking brake cable guide bolt (Left side only).
- Remove the lower control arm bolt (4) and nut at the axle and discard the nut .
- Remove the lower control arm bolt and nut (2) at the frame.
- Remove the lower control arm (3) from the vehicle.