Case Assembly, Differential, Electric: Disassembly
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Only the electric locker actuator and side bearings are serviceable. The ring and pinion gears are serviceable as a matched set. Any internal differential components are serviced with the case assembly.
- Remove the differential case bearing. Refer to BEARING, DIFFERENTIAL SIDE, REMOVAL .
- Remove the electric locker actuator preload spring (1).
- Remove the electric locker actuator assembly (1) by lifting it up and off the differential case.