LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1619 (Rear Axle - 292 Aa (11 1/2) - 2500 Hd) >> Bearing, Differential Side >> Removal >> Without ELSD

Without ELSD

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0107870Courtesy of CHRYSLER GROUP, LLC
  1. Remove differential case from the housing.
  2. Install Plug (special tool #8964, Plug, Differential Bearing) (4) into the end of the case.
  3. Remove differential case bearings (3) with Bearing Splitter (special tool #1130, Splitter, Bearing/Gear) (2) and Bridge (special tool #938, Bridge) (1).
scientia non olet · About LEMON Manuals