LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1618 ((Radio Frequency (RF Hub) Module - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> B1A7B-62-Immobilizer Antenna (Kin/IGNM) - Signal Compare Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

When the hard-wired ignition run/start line between the KIN / IGNM and RFH indicates a different ignition position from the received signal of the LIN bus between the KIN / IGNM and the RFH.

scientia non olet · About LEMON Manuals