LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1617 (6.4L - DTCS P0206 To P0562 - 2500 Hd) >> DTC Troubleshooting >> P0521-Engine Oil Pressure Sensor Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) looks for a delta change in engine oil pressure of 206 kPa (29.88 psi) between key on (zero psi) and above 1150 RPM. If the PCM does not see a change of more than 206 kPa (29.88 psi), the sensor is determined to be inactive. One trip fault.

scientia non olet · About LEMON Manuals