LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1611 (5.7L - DTCS P0521 To P1414 - 2500 Hd) >> DTC Troubleshooting >> P1115-General Temperature Rationality >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) uses General Temperature Rationality to look at the outputs of the three temperature sensors and compares them under cold start conditions. Following a start to run delay time, the outputs of the Ambient Air Temperature (AAT) Sensor, Engine Coolant Temperature (ECT) Sensor, and the Intake Air Temperature (IAT) Sensor will be compared. If two sensors agree but not the third, the third sensor is declared as irrational. If all three sensors are irrational the General Temperature Sensor Rationality is declared.