LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1611 (5.7L - DTCS P0521 To P1414 - 2500 Hd) >> DTC Troubleshooting >> P0573-Brake Switch 1 Stuck Off >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
5-VOLT SUPPLY CIRCUIT OPEN OR SHORTED
BPP POSITION SIGNAL CIRCUIT SHORTED TO VOLTAGE
BPP POSITION SIGNAL CIRCUIT SHORTED TO THE 5-VOLT SUPPLY CIRCUIT
BPP SENSOR SIGNAL CIRCUIT SHORT TO GROUND
BPP POSITION SIGNAL CIRCUIT SHORTED TO THE BPP RETURN CIRCUIT
BPP SENSOR SIGNAL CIRCUIT OPEN/HIGH RESISTANCE
BPP SENSOR RETURN CIRCUIT OPEN/HIGH RESISTANCE
BRAKE PEDAL POSITION (BPP) SENSOR
ANTI LOCK BRAKE CONTROL MODULE

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .