LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1610 (Audio/Video/Entertainment/Connectivity - ( Service Information ) - 2500 Hd) >> Media Hub >> Removal >> Console Mounted

Console Mounted

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Single USB port media hub shown, duel USB port media hub similar.

NOTE:

The four retaining tabs on the rear of the media hub must be compressed for removal.

  1. Disconnect and isolate the negative battery cable.
    GC0161562Courtesy of CHRYSLER GROUP, LLC
  2. Open the floor console storage bin and remove the rubber mat.
  3. Remove the seven inner tray retaining screws (1).
  4. Remove the inner tray enough to access the wire harness connectors on the media hub.
    GC0161600Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the wire harness connectors (1, 2) from the media hub.
  6. Compress the four retaining tabs (3) on the media hub, to release the media hub from the inner tray and remove the media hub.
scientia non olet · About LEMON Manuals