LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1610 (Audio/Video/Entertainment/Connectivity - ( Service Information ) - 2500 Hd) >> Components, Radio Noise Suppression >> Removal >> Engine To Heat Shield

Engine To Heat Shield

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the attaching bolts from the cylinder heads.
    GC0091831Courtesy of CHRYSLER GROUP, LLC
  3. Remove nut (3) from heat shield (1) and remove strap (2).
scientia non olet · About LEMON Manuals