LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1606 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> C147C-Front Axle Disconnect Power Circuit Low >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
(F946) FUSED IGNITION RUN/START CONTROL OUTPUT CIRCUIT OPEN OR HIGH RESISTANCE
(F946) FUSED IGNITION RUN/START CONTROL OUTPUT CIRCUIT SHORTED TO GROUND
DRIVETRAIN CONTROL MODULE (DTCM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .