LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1603 (Base Brakes - (Service Information) - 2500 Hd) >> Parking Brake >> Cable, Parking Brake >> Removal >> Right Rear Cable

Right Rear Cable

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0091777Courtesy of CHRYSLER GROUP, LLC
1 - LOCKING PLIERS
2 - PARKING BRAKE CABLE
  1. Raise and support the vehicle.
  2. Lockout the parking brake cable (2).
  3. Loosen the brake cable at the equalizer and adjuster nut.
    GC0083395Courtesy of CHRYSLER GROUP, LLC
    1 - SUPPORT PLAT
    2 - CABLE MOUNT
    3 - PARK BRAKE LEVER
    4 - CABLE
  4. Remove the right cable from the front cable.
  5. Remove the right cable from the equalizer.
  6. Remove the cable from the frame bracket.
  7. Remove the cable from the axle bracket.
  8. Remove the cable bracket from the shock bracket.
  9. Remove the brake cable (4) from the brake lever (3).
scientia non olet · About LEMON Manuals