Pads, Brake: Removal: Rear

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the rear wheel and tire assemblies.
Compress the caliper.

Remove caliper slide bolts (3).

Courtesy of CHRYSLER GROUP, LLC

1 - Rotor

2 - Brake Shoes

3 - Disc Brake Caliper

NOTE:

Do not allow brake hose to support caliper assembly.

Remove the caliper (3), by tilting the top out and off the caliper adapter.

Courtesy of CHRYSLER GROUP, LLC

1 - INBOARD SHOE

2 - CALIPER ADAPTER
Remove inboard brake shoe (1) from the caliper adapter (2).

Courtesy of CHRYSLER GROUP, LLC

1 - OUTBOARD SHOE

2 - CALIPER ADAPTER
Remove outboard brake shoe (1) from caliper adapter (2).

Courtesy of CHRYSLER GROUP, LLC

1 - CALIPER ADAPTER

2 - ANTI-RATTLE SPRING

NOTE:
Anti-rattle springs are not interchangeable.
Remove the top anti-rattle spring (2) from the caliper adapter (1).

Courtesy of CHRYSLER GROUP, LLC

1 - ANTI-RATTLE SPRING

2 - CALIPER ADAPTER
Remove the bottom anti-rattle spring (1) from the caliper adapter (2).