Front - Light Duty
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
- Clean caliper mounting adapter.
- Install new
anti-rattle clips (1) to the brake pads (2).
- Install inboard brake pad (4) in adapter (1).
- Install outboard brake pad (2) in adapter (1).
- Install the caliper (1) over rotor, Then push the caliper onto the adapter (2).
- Install caliper slide pin bolts (4). Refer to CALIPER, DISC BRAKE, INSTALLATION .
- Install wheel and tire assemblies and lower vehicle. Refer to TECHNICAL SPECIFICATIONS .
- Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
- Top off master cylinder fluid level.