LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1603 (Base Brakes - (Service Information) - 2500 Hd) >> Diagnosis And Testing >> Diagnosis And Testing - Base Brake System >> Diagnosis And Testing - Base Brake System Diagnosis Charts >> Red Brake Warning Indicator

Red Brake Warning Indicator

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
CONDITION POSSIBLE CAUSES CORRECTION
RED BRAKE WARNING INDICATOR ON 1. Parking brake lever not fully released. 1. Release parking brake lever.
2. Parking brake warning lamp switch on parking brake lever. 2. Inspect and replace switch as necessary.
3. Brake fluid level low in reservoir. 3. Fill reservoir. Check entire system for leaks. Repair or replace as required.
4. Brake fluid level switch. 4. Disconnect switch wiring connector. If lamp goes out, replace switch.
5. Mechanical instrument cluster (MIC) problem. 5. Refer to appropriate diagnostic information.
6. Amber Anti-lock Brake System (ABS) Warning Indicator Lamp also illuminated 6. Refer to appropriate diagnostic information.
7. ABS Electric Vacuum Pump (EVP) malfunction. 7. Refer to DIAGNOSIS AND TESTING or DIAGNOSTIC CODE INDEX and perform the appropriate diagnostic information.
8. Electric park brake is not released 8. Check EPB switch position. Refer to DIAGNOSTIC CODE INDEX .
9. Park brake warning switch 9. Refer to DIAGNOSTIC CODE INDEX .