LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Ignition System (Service Information)) >> Capacitor, Ignition >> Removal >> Removal

Capacitor, Ignition: Removal: Removal

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Coil Capacitor
GC0083487Courtesy of CHRYSLER GROUP, LLC
1 - COIL CAPACITOR
2 - MOUNTING STUD
3 - GROUND STRAP
4 - MOUNTING NUT
5 - ELEC. CONNECT.

The coil capacitor is located in the right-rear section of the engine compartment. It is attached with a mounting stud and nut.

  1. Disconnect electrical connector (5) at capacitor.
  2. Remove mounting nut and remove ground strap.
  3. Remove capacitor (1).