5.7L Engine
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Viscous fan, fan shroud and electric cooling fan removed for clarity.
- Partially drain the cooling system. Refer to Standard Procedure .WARNING:
Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the engine coolant temperature (ECT) sensor.
- Disconnect the electrical connector from the engine coolant temperature (ECT) sensor (2).
- Remove the engine coolant temperature (ECT) sensor (2) from the water pump assembly.