LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cooling System - Engine & Transmission) >> Engine >> PUMP, Water >> Removal >> 5.7L Engine

5.7L Engine

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Thermostat Housing, Water Pump, Belt Tensioner, & Idler Pulley
GC0137090Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove the air intake assembly. Refer to BODY, Air Cleaner, Removal, 5.7L .
  3. Remove the resonator mounting bracket.
  4. Remove cooling fan assembly. Refer to FAN, Cooling, Electric, Removal  or FAN, Cooling, Viscous, Removal .
  5. Drain coolant into a clean container. Refer to Standard Procedure .
  6. Remove the upper radiator hose from the thermostat housing (1) and position aside.
  7. Remove serpentine belt. Refer to BELT, Serpentine, Removal .
  8. Remove idler pulley (5).
  9. Remove belt tensioner assembly (4). Refer to TENSIONER, Belt, Removal .
  10. Remove lower radiator hose from the water pump and position aside.
  11. Remove the upper metal heater tube from the cylinder head.
  12. Remove water pump mounting bolts (6) and remove pump (3).
scientia non olet · About LEMON Manuals