6.7L Diesel
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Position the coolant recovery bottle (3) into the vehicle.
- Install mounting bolts (1). Tighten to 8.5 N.m (75 in. lbs).
- Install overflow hose (2) onto the coolant recovery bottle (3).
- Fill the coolant recovery bottle (3) with coolant until the required level is met.
- If equipped, connect the negative battery cable to the auxiliary battery.
- Connect the negative battery cable.