LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Cooling System - Engine & Transmission) >> Accessory Drive >> PULLEY, Idler >> Installation >> 5.7L Engine

5.7L Engine

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt (5.7L Engine)
GC0091800Courtesy of CHRYSLER LLC
  1. Position the idler pulley (2).
  2. Install the idler pulley (2) bolt. Tighten the bolt to 54 N.m (40 ft. lbs.).
  3. Install the accessory drive belt (4). Refer to BELT, Serpentine, Installation .
scientia non olet · About LEMON Manuals