5.7L Engine
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Insert a suitable square drive ratchet into the square hole on belt tensioner arm (7).
- Release the belt tension by rotating the tensioner (7) clockwise
. Rotate the belt tensioner (7) until the accessory belt (4) can be removed from pulleys (1, 2, 3, 5, 6, 8).CAUTION:
Do not let the tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.
- Remove the accessory belt (4).
- Gently release the tensioner (7).