6.7L Diesel Engine

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accessory Drive Belt Routing - Diesel Engine With A/C

Courtesy of CHRYSLER LLC

1 - IDLER PULLEY

2 - ACCESSORY DRIVE BELT

3 - P/S PULLEY

4 - RADIATOR FAN PULLEY

5 - CRANKSHAFT PULLEY

6 - A/C COMPRESSOR PULLEY

7 - ACCESSORY DRIVE BELT TENSIONER

8 - GENERATOR

9 - WATER PUMP PULLEY

CAUTION:

When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction.

Position drive belt over all pulleys except water pump pulley.

Attach a suitable tool to the accessory drive belt tensioner.

Fig 2: Drive Belt Routing - Diesel Engine Without A/C

Courtesy of CHRYSLER LLC

1 - IDLER PULLEY

2 - ACCESSORY DRIVE BELT

3 - P/S PULLEY

4 - RADIATOR FAN PULLEY

5 - CRANKSHAFT PULLEY

6 - ACCESSORY DRIVE BELT TENSIONER

7 - GENERATOR

8 - WATER PUMP

Rotate accessory drive belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove tool. Be sure belt is properly seated on all pulleys.