LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1598 (Instrument Cluster - (Service Information) - 2500 Hd) >> Pod, Switch >> Removal

Pod, Switch: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
    GC0154419Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the switch pod electrical connectors (2) and (3).
  4. Remove the four switch pod fasteners (1) and (4) from the center bezel.
  5. Separate the switch pod from the center bezel.
scientia non olet · About LEMON Manuals