LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Electronic Control Modules - (Service Information) - 2500 Hd) >> Module, Fuel Pump Control >> Removal

Module, Fuel Pump Control: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0154484Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the battery negative cable.
  2. Raise the vehicle.
  3. Disconnect the fuel pump control module electrical connector (1).
  4. Remove the nuts (4) from the studs.
  5. Remove the fuel pump control module (2) from the frame.
  6. If required, remove the heat shield (3).
scientia non olet · About LEMON Manuals