LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Electronic Control Modules - (Service Information) - 2500 Hd) >> Module, Drivetrain Control (DTCM) >> Installation

Module, Drivetrain Control (DTCM): Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0094880Courtesy of CHRYSLER GROUP, LLC
  1. Place the Drive Train Control Module (3) in its location on the mounting plate (4) and firmly snap into place.
  2. Connect the electrical connectors (2).
  3. Install cover back onto the DTCM by snapping into place.
  4. Install carpeting back into its proper location.
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals