LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Electronic Control Modules - (Service Information) - 2500 Hd) >> Module, Compass >> Installation

Module, Compass: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0143742Courtesy of CHRYSLER GROUP, LLC
  1. Position the Remote Compass Module (RCM) (2) in the console.
  2. Install the four fasteners (5) that secure the RCM to the overhead console (1).
  3. Install the overhead console assembly, Refer to CONSOLE, OVERHEAD, FRONT, INSTALLATION .
  4. Connect the negative battery cable.
  5. Perform the Compass Variance Adjustment. Refer to COMPASS VARIANCE ADJUSTMENT .
  6. Perform the Manual Compass Calibration. Refer to MANUAL COMPASS CALIBRATION .
  7. Verify proper compass operation.
scientia non olet · About LEMON Manuals