LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1590 (Battery System (Service Information) - 2500 Hd) >> Cables, Battery >> Removal >> Right Side Diesel >> Right Side Positive

Right Side Positive

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155313Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove nut (1) and the battery positive cable (2) from terminal clamp.
  3. Remove the positive cable clamp.
  4. Remove nut (6) securing the B+ cable (3) to the intake air heater relay.
  5. Remove the wire harness retainer pushpin (4) at the intake air heater relay.
  6. Remove the wire harness retainer pushpin at the oil filter housing.
  7. Remove the terminal cap (5) to the generator B+ stud.
    GC0155224Courtesy of CHRYSLER GROUP, LLC
  8. Remove the nut (2) the B+ cable (1) from the generator.
  9. Disconnect any remaining pushpin's securing the cable and remove the cable.
scientia non olet · About LEMON Manuals