LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1590 (Battery System (Service Information) - 2500 Hd) >> Cables, Battery >> Installation >> Left-Side >> Left Side Negative

Left Side Negative

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155272Courtesy of CHRYSLER GROUP, LLC
  1. Position the negative battery cable and attach all routing clips and pushpin fasteners.
  2. Install the negative battery cable (1) to the engine block. Tighten nut (2) to 24 N.m (18 ft. lbs.).
    GC0155227Courtesy of CHRYSLER GROUP, LLC
  3. Install the battery negative cable (1) to frame rail. Tighten nut (2) to 15 N.m (133 in. lbs.).
    GC0155269Courtesy of CHRYSLER GROUP, LLC
  4. Install the bolt securing the negative cable to the left front fender and tighten to 10 N.m (89 in. lbs.).
  5. Install the negative battery cable clamp (3). Tighten clamp nut to 6 N.m (53 in. lbs.).
  6. Install the battery negative cables (10, 11). Tighten nut to 10 N.m (89 in. lbs.).
scientia non olet · About LEMON Manuals