6.7L Diesel
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
- Remove the exhaust pipe-to-DOC/DPF flange nuts (2).
- 4X4 Vehicles - Remove transfer case skid plate. Refer to PLATE, SKID, TRANSFER CASE, REMOVAL .
- 4X4 Vehicles - Remove transmission crossmember. Refer to CROSSMEMBER, TRANSMISSION, REMOVAL .
- Remove the exhaust pipe-to-turbocharger clamp (5) and discard.
- Remove the transmission mounted exhaust pipe support (4).
- Separate the exhaust pipe (3).
- Remove exhaust pipe (3).